- Three Layers Non Woven Earloop Sheet Mask Making Machine
Equipment characteristics
- The machine adopts aluminum alloy structure, small size, stable
operation and low scrap rate;
- With photoelectric detection, automatic counting, can control the
production speed and high output;
- It can produce about 100 pieces per minute, and can produce (3-6
layers) multi-layer masks.
- You can adjust the size of the mask blank and the folding location.
- The whole line include face mask blank making machine and outside
earloop welding machine
Face mask blank making machine
- Function:The machine is an automatic machine for producing the main
part of the face mask, there is no need labour force because the
machine can handle the whole process including feeding,aluminum
strip inserting,cutting,folding,ultrasonic fusing,slices. It has a
high output.
- Size: 3345*630*1830mm
- Output: 120pcs/min
- Voltage:220V
- Power consumption: 2.7KW
Raw materials for manufacturing face mask:
| 1 | Two layers of PP non-woven composite fiber (about 30g). |
| 2 | The middle layer is meltblown cloth (about 25g). |
| 3 | Nose bridge strip PP3 mm. |
| 4 | Earband is round with a diameter of 2.5-3mm. |
Technical Parameters:
1. Equipment size: 6150mm (L) × 3720mm (W) × 1950mm (H) (excluding
receiving line)
2. Appearance color: international standard warm gray 1C (DB
standard color), according to this standard without special
instructions
3. Equipment weight: ≤5000kg, ground load ≤500KG / m2；
4. Working power: equipment 220VAC ± 5 ﹪, 50HZ, rated power about
9KW
5. Compressed air: 0.5 ～ 0.7 MPa, the use flow rate is about 300L /
min
6. Operating environment: temperature 10 ～ 35 ℃, humidity 5-35% HR,
no flammable or corrosive gas Body, no dust (cleanliness no less
than 100,000)
7. Production efficiency: 90-130PCS / MIN;
8. Equipment production pass rate: 99% (except when the incoming
materials do not meet the requirements or the employees' improper
operation is excluded)
9. Equipment failure rate: 2% (refers to the failure caused by the
equipment itself)
Technical Description
| Name | Fully automatic three-layer mask making machine (outer ear type) |
| Finished product specifications | 175mm x 95mm |
| Finished product technology | Three-layer bonding, with nose thread, ear Haning type |
| Production capacity | 100-120 pcs / minute |
| Use materials | 20-30 gram PP non-woven fabrics |
| Suitable for layers | 3-4 layers |
| Control method | PLC display touching screen |
| Power | 10-12 kw |
| Supersonic wave | 20 KHZ |
| Voltage | 220v / 50hz |
Features:
1. High stability, low failure rate, beautiful appearance without
rust.
2. Computer PLC programming control, servo drive, high degree of
automation.
3. Photoelectric detection of raw materials to avoid mistakes and
reduce waste.
4. The automatic mask making machine is automatic from material
feeding to mask collection.
5. High automation in ear-loop welding, edge wrapping, counting,
and material discharging.
6. The ultrasonic technique does no harm to the characteristic of
the material. Easy and safe operation.
7. Artistic and durable, aluminum alloy board, lean and
practicality.
8. Faster, Rotary connection device of Independent innovation
design.
9. More stable, upgraded machine, touch screen, Taiwan
photoelectric detection, stable performance, and low failure rate
